Heavy-duty steering knuckles correct steering geometry for ESC compatibility
Top-mounted shock spacers provide lift and easy installation
Differential skid plate for better off-road protection
Heavy-duty blocks and u-bolts ensure rear suspension durability and a lifted rear end
NX2 Nitro shock absorbers provide excellent damping both on and off-road
Ability to mount tires up to 35 inches in diameter for a bold, aggressive stance
NX2 Nitro Series shock absorbers:
Twin-tube design
10-stage speed-sensitive valving
Double-welded ends for greater durability
High-flow 1-3/8-inch piston
Self-lubricating seals
Silver powder coat finish
Included:
(2) Nitro NX2 Lift 4-6 rear shock absorber
BDS023670 & BDS023671:
(2) steering knuckle
BDS023652:
Front BDS cradle
(2) Stabilizer mount relocation
Differential skid plate
(2) Brake line mount
1/4 drive shaft spacer
BDS023653:
Rear BDS cradle
(2) Differential mount relocation
(2) Differential mount
BDS023654:
6 shock absorber spacer
BDS013538:
(2) Lift block 5
(2) Lower spring pad
(2) Upper spring pad
(4) U-Bolt
Brake line relocation
Hardware
Notes:
Wheels with a diameter of 18 or more are required. Standard 17” and 18 wheels cannot be reinstalled. Standard 20 wheels can be used with tires up to 305/60R20
18” wheels with backspacing of 5-5.5 must be tried on before mounting the tire to ensure proper clearance to the steering knuckle/rod. Backspacing of 5.5 is highly recommended due to tire-to-frame clearance
Models with 2-piece rear driveshaft require shim kit BDS122406 (sold separately) Block kit replaces factory 1-1/4 blocks Factory blocks will not be reinstalled
Crash bar may require modification depending on wheel and tire selection. It is the responsibility of the user to make sure that modifications will not adversely affect the safety of the vehicle Some cars with a 2-piece driveshaft to be called in by Ford for driveshaft replacement. (Safety Recall 21S25) Due to the 2-piece driveshaft recall procedure, BDS recommends doing this before installing the kit
Does not fit models equipped with the Continuous Controlled Damping (CCD) system Requires modification of the frame mount
Does not fit models with a diesel engine Does not fit Tremor and Raptor models
Fits 4WD models only
Maximum wheel size:
35 x 12.5 with 18 x 9 and 5” backspacing. May require trimming
35 x 12.5 with 20 x 9 and 4.5” backspacing. May require trimming
37 x 12.5 with 20 x 9 and 5.5” backspacing. May require trimming
Security policy
Delivery policy
Return policy
